Menu
Name
- For Macos Ps What Is Tty Software
- For Macos Ps What Is Tty Stand
- For Macos Ps What Is Tty On Computer
- For Macos Ps What Is Tty Code
- For Macos Ps What Is Tty Stand
- For Macos Ps What Is Tty On Android
So far I don't believe OSX has a built in that does this. But here's an answer I posted on stackexchange as well; a small perl script that determines the process hierarchy and prints it in an indented form using the output of OSX's built-in ps(1). Tested on OSX 10.6 and 10.9. Jul 15, 2019 tty. The response shows we are connected to the device file at /dev/pts/0. Our terminal window, which is a software emulation of a teletype (TTY), is interfaced to the pseudo-teletype multiplexor as a pseudo-teletype (PTS). And it happens to be number zero. The Silent Option. The -s (silent) option causes tty to generate no output. I would like to parse the output of ps, to get any field using awk. It seems that ps separate the fields by whitespaces, but the values in COMMAND field usually have whitespaces.
pmset — manipulate power management settings
Synopsis
pmset [−a | −b | −c | −u] [setting value] [..]
pmset −u [haltlevel percent] [haltafter minutes] [haltremain minutes]
pmset −g [option]
pmset schedule [cancel | cancelall] type date+time [owner]
pmset repeat cancel
pmset repeat type weekdays time
pmset relative [wake | poweron] seconds
pmset [touch | sleepnow | displaysleepnow | boot]
pmset −u [haltlevel percent] [haltafter minutes] [haltremain minutes]
pmset −g [option]
pmset schedule [cancel | cancelall] type date+time [owner]
pmset repeat cancel
pmset repeat type weekdays time
pmset relative [wake | poweron] seconds
pmset [touch | sleepnow | displaysleepnow | boot]
Description
For Macos Ps What Is Tty Software
pmset manages power management settings such as idle sleep timing, wake on administrative access, automatic restart on power loss, etc.
Note that processes may dynamically override these power management settings by using I/O Kit power assertions. Whenever processes override any system power settings, pmset will list those processes and their power assertions in −g and −g assertions. See caffeinate(8).
Setting
pmset can modify the values of any of the power management settings defined below. You may specify one or more setting & value pairs on the command-line invocation of pmset. The −a, −b, −c, −u flags determine whether the settings apply to battery ( −b ), charger (wall power) ( −c ), UPS ( −u ) or all ( −a ).
Use a minutes argument of 0 to set the idle time to never for sleep disksleep and displaysleep
pmset must be run as root in order to modify any settings.
Settings
![For For](https://media-1256569450.cos.ap-chengdu.myqcloud.com/blog/2019-11-14-15737001580378.jpg)
displaysleep - display sleep timer; replaces ’dim’ argument in 10.4 (value in minutes, or 0 to disable)
disksleep - disk spindown timer; replaces ’spindown’ argument in 10.4 (value in minutes, or 0 to disable)
sleep - system sleep timer (value in minutes, or 0 to disable)
womp - wake on ethernet magic packet (value = 0/1). Same as 'Wake for network access' in the Energy Saver preferences.
ring - wake on modem ring (value = 0/1)
powernap - enable/disable Power Nap on supported machines (value = 0/1)
proximitywake - On supported systems, this option controls system wake from sleep based on proximity of devices using same iCloud id. (value = 0/1)
autorestart - automatic restart on power loss (value = 0/1)
lidwake - wake the machine when the laptop lid (or clamshell) is opened (value = 0/1)
acwake - wake the machine when power source (AC/battery) is changed (value = 0/1)
lessbright - slightly turn down display brightness when switching to this power source (value = 0/1)
halfdim - display sleep will use an intermediate half-brightness state between full brightness and fully off (value = 0/1)
sms - use Sudden Motion Sensor to park disk heads on sudden changes in G force (value = 0/1)
hibernatemode - change hibernation mode. Please use caution. (value = integer)
hibernatefile - change hibernation image file location. Image may only be located on the root volume. Please use caution. (value = path)
ttyskeepawake - prevent idle system sleep when any tty (e.g. remote login session) is ’active’. A tty is ’inactive’ only when its idle time exceeds the system sleep timer. (value = 0/1)
networkoversleep - this setting affects how OS X networking presents shared network services during system sleep. This setting is not used by all platforms; changing its value is unsupported.
destroyfvkeyonstandby - Destroy File Vault Key when going to standby mode. By default File vault keys are retained even when system goes to standby. If the keys are destroyed, user will be prompted to enter the password while coming out of standby mode.(value: 1 - Destroy, 0 - Retain)
disksleep - disk spindown timer; replaces ’spindown’ argument in 10.4 (value in minutes, or 0 to disable)
sleep - system sleep timer (value in minutes, or 0 to disable)
womp - wake on ethernet magic packet (value = 0/1). Same as 'Wake for network access' in the Energy Saver preferences.
ring - wake on modem ring (value = 0/1)
powernap - enable/disable Power Nap on supported machines (value = 0/1)
proximitywake - On supported systems, this option controls system wake from sleep based on proximity of devices using same iCloud id. (value = 0/1)
autorestart - automatic restart on power loss (value = 0/1)
lidwake - wake the machine when the laptop lid (or clamshell) is opened (value = 0/1)
acwake - wake the machine when power source (AC/battery) is changed (value = 0/1)
lessbright - slightly turn down display brightness when switching to this power source (value = 0/1)
halfdim - display sleep will use an intermediate half-brightness state between full brightness and fully off (value = 0/1)
sms - use Sudden Motion Sensor to park disk heads on sudden changes in G force (value = 0/1)
hibernatemode - change hibernation mode. Please use caution. (value = integer)
hibernatefile - change hibernation image file location. Image may only be located on the root volume. Please use caution. (value = path)
ttyskeepawake - prevent idle system sleep when any tty (e.g. remote login session) is ’active’. A tty is ’inactive’ only when its idle time exceeds the system sleep timer. (value = 0/1)
networkoversleep - this setting affects how OS X networking presents shared network services during system sleep. This setting is not used by all platforms; changing its value is unsupported.
destroyfvkeyonstandby - Destroy File Vault Key when going to standby mode. By default File vault keys are retained even when system goes to standby. If the keys are destroyed, user will be prompted to enter the password while coming out of standby mode.(value: 1 - Destroy, 0 - Retain)
Getting
−g (with no argument) will display the settings currently in use.
−glive displays the settings currently in use.
−gcustom displays custom settings for all power sources.
−gcap displays which power management features the machine supports.
−gsched displays scheduled startup/wake and shutdown/sleep events.
−gups displays UPS emergency thresholds.
−gps / batt displays status of batteries and UPSs.
−gpslog displays an ongoing log of power source (battery and UPS) state.
−grawlog displays an ongoing log of battery state as read directly from battery.
−gtherm shows thermal conditions that affect CPU speed. Not available on all platforms.
−gthermlog shows a log of thermal notifications that affect CPU speed. Not available on all platforms.
−gassertions displays a summary of power assertions. Assertions may prevent system sleep or display sleep. Available 10.6 and later.
−gassertionslog shows a log of assertion creations and releases. Available 10.6 and later.
−gsysload displays the 'system load advisory' - a summary of system activity available from the IOGetSystemLoadAdvisory API. Available 10.6 and later.
−gsysloadlog displays an ongoing log of lives changes to the system load advisory. Available 10.6 and later.
−gac / adapter will display details about an attached AC power adapter. Only supported for MacBook and MacBook Pro.
−glog displays a history of sleeps, wakes, and other power management events. This log is for admin & debugging purposes.
−guuid displays the currently active sleep/wake UUID; used within OS X to correlate sleep/wake activity within one sleep cycle. history
−guuidlog displays the currently active sleep/wake UUID, and prints a new UUID as they’re set by the system.
−ghistory is a debugging tool. Prints a timeline of system sleeplwake UUIDs, when enabled with boot-arg io=0x3000000.
−ghistorydetailed Prints driver-level timings for a sleep/wake. Pass a UUID as an argument.
−gpowerstate [class names] Prints the current power states for I/O Kit drivers. Caller may provide one or more I/O Kit class names (separated by spaces) as an argument. If no classes are provided, it will print all drivers’ power states.
−gpowerstatelog [-i interval] [class names] Periodically prints the power state residency times for some drivers. Caller may provide one or more I/O Kit class names (separated by spaces). If no classes are provided, it will log the IOPower plane’s root registry entry. Caller may specify a polling interval, in seconds with -i <polling interval>; otherwise it defaults to 5 seconds.
−gstats Prints the counts for number sleeps and wakes system has gone thru since boot.
−gsystemstate Prints the current power state of the system and available capabilites.
−geverything Prints output from every argument under the GETTING header. This is useful for quickly collecting all the output that pmset provides. Available in 10.8.
−glive displays the settings currently in use.
−gcustom displays custom settings for all power sources.
−gcap displays which power management features the machine supports.
−gsched displays scheduled startup/wake and shutdown/sleep events.
−gups displays UPS emergency thresholds.
−gps / batt displays status of batteries and UPSs.
−gpslog displays an ongoing log of power source (battery and UPS) state.
−grawlog displays an ongoing log of battery state as read directly from battery.
−gtherm shows thermal conditions that affect CPU speed. Not available on all platforms.
−gthermlog shows a log of thermal notifications that affect CPU speed. Not available on all platforms.
−gassertions displays a summary of power assertions. Assertions may prevent system sleep or display sleep. Available 10.6 and later.
−gassertionslog shows a log of assertion creations and releases. Available 10.6 and later.
−gsysload displays the 'system load advisory' - a summary of system activity available from the IOGetSystemLoadAdvisory API. Available 10.6 and later.
−gsysloadlog displays an ongoing log of lives changes to the system load advisory. Available 10.6 and later.
−gac / adapter will display details about an attached AC power adapter. Only supported for MacBook and MacBook Pro.
−glog displays a history of sleeps, wakes, and other power management events. This log is for admin & debugging purposes.
−guuid displays the currently active sleep/wake UUID; used within OS X to correlate sleep/wake activity within one sleep cycle. history
−guuidlog displays the currently active sleep/wake UUID, and prints a new UUID as they’re set by the system.
−ghistory is a debugging tool. Prints a timeline of system sleeplwake UUIDs, when enabled with boot-arg io=0x3000000.
−ghistorydetailed Prints driver-level timings for a sleep/wake. Pass a UUID as an argument.
−gpowerstate [class names] Prints the current power states for I/O Kit drivers. Caller may provide one or more I/O Kit class names (separated by spaces) as an argument. If no classes are provided, it will print all drivers’ power states.
−gpowerstatelog [-i interval] [class names] Periodically prints the power state residency times for some drivers. Caller may provide one or more I/O Kit class names (separated by spaces). If no classes are provided, it will log the IOPower plane’s root registry entry. Caller may specify a polling interval, in seconds with -i <polling interval>; otherwise it defaults to 5 seconds.
−gstats Prints the counts for number sleeps and wakes system has gone thru since boot.
−gsystemstate Prints the current power state of the system and available capabilites.
−geverything Prints output from every argument under the GETTING header. This is useful for quickly collecting all the output that pmset provides. Available in 10.8.
SAFE SLEEP ARGUMENTS
hibernatemode supports values of 0, 3, or 25. Whether or not a hibernation image gets written is also dependent on the values of standby and autopoweroff
For example, on desktops that support standby a hibernation image will be written after the specified standbydelay time. To disable hibernation images completely, ensure hibernatemode standby and autopoweroff are all set to 0.
hibernatemode = 0 by default on desktops. The system will not back memory up to persistent storage. The system must wake from the contents of memory; the system will lose context on power loss. This is, historically, plain old sleep.
hibernatemode = 3 by default on portables. The system will store a copy of memory to persistent storage (the disk), and will power memory during sleep. The system will wake from memory, unless a power loss forces it to restore from hibernate image.
hibernatemode = 25 is only settable via pmset. The system will store a copy of memory to persistent storage (the disk), and will remove power to memory. The system will restore from disk image. If you want 'hibernation' - slower sleeps, slower wakes, and better battery life, you should use this setting.
Please note that hibernatefile may only point to a file located on the root volume.
STANDBY ARGUMENTS
standby causes kernel power management to automatically hibernate a machine after it has slept for a specified time period. This saves power while asleep. This setting defaults to ON for supported hardware. The setting standby will be visible in pmset −g if the feature is supported on this machine.
standbydelayhigh and standbydelaylow specify the delay, in seconds, before writing the hibernation image to disk and powering off memory for Standby. standbydelayhigh is used when the remaining battery capacity is above highstandbythreshold , and standbydelaylow is used when the remaining battery capacity is below highstandbythreshold.
highstandbythreshold has a default value of 50 percent.
autopoweroff is enabled by default on supported platforms as an implementation of Lot 6 to the European Energy-related Products Directive. After sleeping for <autopoweroffdelay> seconds, the system will write a hibernation image and go into a lower power chipset sleep. Wakeups from this state will take longer than wakeups from regular sleep.
autopoweroffdelay specifies the delay, in seconds, before entering autopoweroff mode.
UPS SPECIFIC ARGUMENTS
UPS-specific arguments are only valid following the −u option. UPS settings also have an on/off value. Use a -1 argument instead of percent or minutes to turn any of these settings off. If multiple halt conditions are specified, the system will halt on the first condition that occurs in a low power situation.
![Tty Tty](https://media-1256569450.cos.ap-chengdu.myqcloud.com/blog/2019-11-14-15737000881243.jpg)
haltlevel - when draining UPS battery, battery level at which to trigger an emergency shutdown (value in %)
haltafter - when draining UPS battery, trigger emergency shutdown after this long running on UPS power (value in minutes, or 0 to disable)
haltremain - when draining UPS battery, trigger emergency shutdown when this much time remaining on UPS power is estimated (value in minutes, or 0 to disable)
haltafter - when draining UPS battery, trigger emergency shutdown after this long running on UPS power (value in minutes, or 0 to disable)
haltremain - when draining UPS battery, trigger emergency shutdown when this much time remaining on UPS power is estimated (value in minutes, or 0 to disable)
Note: None of these settings are observed on a system with support for an internal battery, such as a laptop. UPS emergency shutdown settings are for desktop and server only.
SCHEDULED EVENT ARGUMENTS
pmset allows you to schedule system sleep, shutdown, wakeup and/or power on. 'schedule' is for setting up one-time power events, and 'repeat' is for setting up daily/weekly power on and power off events. Note that you may only have one pair of repeating events scheduled - a 'power on' event and a 'power off' event. For sleep cycling applications, pmset can schedule a 'relative' wakeup or poweron to occur in seconds from the end of system sleep/shutdown, but this event cannot be cancelled and is inherently imprecise.
type - one of sleep, wake, poweron, shutdown, wakeorpoweron
date/time - 'MM/dd/yy HH:mm:ss' (in 24 hour format; must be in quotes)
time - HH:mm:ss
weekdays - a subset of MTWRFSU ('M' and 'MTWRF' are valid strings)
owner - a string describing the person or program who is scheduling this one-time power event (optional)
date/time - 'MM/dd/yy HH:mm:ss' (in 24 hour format; must be in quotes)
time - HH:mm:ss
weekdays - a subset of MTWRFSU ('M' and 'MTWRF' are valid strings)
owner - a string describing the person or program who is scheduling this one-time power event (optional)
POWER SOURCE ARGUMENTS
−g with a ’batt’ or ’ps’ argument will show the state of all attached power sources.
−g with a ’pslog’ or ’rawlog’ argument is normally used for debugging, such as isolating a problem with an aging battery.
OTHER ARGUMENTS
boot - tell the kernel that system boot is complete (normally LoginWindow does this). May be useful to Darwin users.
touch - PM re-reads existing settings from disk.
noidle - pmset prevents idle sleep by creating a PM assertion to prevent idle sleep(while running; hit ctrl-c to cancel). This argument is deprecated in favor of caffeinate(8). Please use caffeinate(8) instead.
sleepnow - causes an immediate system sleep.
restoredefaults - Restores Energy Saver settings to their default values. (Like clicking 'Restore Defaults' in Energy Saver GUI).
displaysleepnow - causes display to go to sleep immediately.
resetdisplayambientparams - resets the ambient light parameters for certain Apple displays.
dim - deprecated in 10.4 in favor of ’displaysleep’. ’dim’ will continue to work.
spindown - deprecated in 10.4 in favor of ’disksleep’. ’spindown’ will continue to work.
touch - PM re-reads existing settings from disk.
noidle - pmset prevents idle sleep by creating a PM assertion to prevent idle sleep(while running; hit ctrl-c to cancel). This argument is deprecated in favor of caffeinate(8). Please use caffeinate(8) instead.
sleepnow - causes an immediate system sleep.
restoredefaults - Restores Energy Saver settings to their default values. (Like clicking 'Restore Defaults' in Energy Saver GUI).
displaysleepnow - causes display to go to sleep immediately.
resetdisplayambientparams - resets the ambient light parameters for certain Apple displays.
dim - deprecated in 10.4 in favor of ’displaysleep’. ’dim’ will continue to work.
spindown - deprecated in 10.4 in favor of ’disksleep’. ’spindown’ will continue to work.
Examples
This command sets displaysleep to a 5 minute timer on battery power, leaving other settings on battery power and other power sources unperturbed.
pmset −b displaysleep 5
For Macos Ps What Is Tty Stand
Sets displaysleep to 10, disksleep to 10, system sleep to 30, and turns on WakeOnMagicPacket for ALL power sources (AC, Battery, and UPS) as appropriate
pmset −a displaysleep 10 disksleep 10 sleep 30 womp 1
Restores the system’s energy settings to their default values.
For a system with an attached and supported UPS, this instructs the system to perform an emergency shutdown when UPS battery drains to below 40%.
pmset −u haltlevel 40
For a system with an attached and supported UPS, this instructs the system to perform an emergency shutdown when UPS battery drains to below 25%, or when the UPS estimates it has less than 30 minutes remaining runtime. The system shuts down as soon as either of these conditions is met.
pmset −u haltlevel 25 haltremain 30
For Macos Ps What Is Tty On Computer
For a system with an attached and supported UPS, this instructs the system to perform an emergency shutdown after 2 minutes of running on UPS battery power.
Jan 31, 2020 MacOS 10.15 Catalina VirtualBox Image The virtual image for VMware has an augmentation VMDK (Virtual Machine Disk) which is basically a virtual hard disc and can be utilized to run your Virtual Machine and run MacOS on VMware. So, install Mac OS Catalina on VMware then download VMware virtual VMDK file. Download macOS 10.15 Catalina VMware Image. This macOS Catalina (VMDK) file format can be used to install and run macOS Catalina on VMware Workstation, Player, Fusion and VirtualBox. The best part is, the single macOS Catalina VMware and VirtualBox image work for both, VMware and VirtualBox. Related: Download macOS High Sierra 10.13.6 DMG File – Full Version. Mar 21, 2020 2. Oracle VM VirtualBox Extension Pack — Get It Here 3. A Mac — Borrow your friend’s if you don’t have one. Step One: Create a macOS Catalina ISO File. To start, we’ll need to create an ISO file of macOS Catalina’s installer, so we can load it in VirtualBox on our machine. Macos catalina for virtualbox.
Microsoft NTFS for Mac by Tuxera brings reliable read-write compatibility for all NTFS-formatted USB drives on your Mac. Try free for 15 days. Ntfs reader for mac catalina. NTFS-3G is an open-source project from Tuxera, so the public can download this NTFS for Mac free to write to Windows NTFS drives on Mac computers. Set aside its advantage for being free, NTFS-3G is complained a lot because of its poor performance. NTFS-3G for Mac OSX. NTFS-3G for Mac OS X brings NTFS read/write support to Mac OS X, along with additional advanced features. It is based on NTFS-3G, an open source NTFS driver that is ported into numerous platforms, but also includes other software projects to build a complete toolset for managing NTFS volumes. NTFS-3G for Mac requires. Microsoft NTFS for Mac by Paragon Software is the best such software solution: reliable, fast, and now affordable as well Fast, seamless, and easy to use, Microsoft NTFS for Mac by Paragon Software is required for those who need to write to Windows volumes. And now it’s more affordable than ever. MacWorld, USA 2016, macworld.com.
pmset −u haltafter 2
Schedules the system to automatically wake from sleep on July 4, 2016, at 8PM.
pmset schedule wake '07/04/16 20:00:00'
Schedules a repeating shutdown to occur each day, Tuesday through Saturday, at 11AM.
pmset repeat shutdown TWRFS 11:00:00
Schedules a repeating wake or power on event every tuesday at 12:00 noon, and a repeating sleep event every night at 8:00 PM.
For Macos Ps What Is Tty Code
pmset repeat wakeorpoweron T 12:00:00 sleep MTWRFSU 20:00:00
For Macos Ps What Is Tty Stand
Prints the power management settings in use by the system.
pmset −g
Prints a snapshot of battery/power source state at the moment.
pmset −g batt
If your system suddenly sleeps on battery power with 20-50% of capacity remaining, leave this command running in a Terminal window. When you see the problem and later power and wake the computer, you’ll be able to detect sudden discontinuities (like a jump from 30% to 0%) indicative of an aging battery.
pmset −g pslog
For Macos Ps What Is Tty On Android
See Also
caffeinate(8)
Files
All changes made through pmset are saved in a persistent preferences file (per-system, not per-user) at /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
Scheduled power on/off events are stored separately in /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
pmset modifies the same file that System Preferences Energy Saver modifies.
Darwin November 9, 2012 Darwin