Menu
Click on the 'Erase' button to start erasing the external hard drive or USB. Formatting a hard drive will take a while and wait for it patiently. Once the progress bar is at 100%, the job is done! How to Recover Formatted Hard Drive on Mac. As it is mentioned above, after formatting a hard drive, all data on the hard drive will be erased.
On Windows 10, whenever you get a new hard drive, it's important to format it before you start dumping files. The reason is that you want to ensure that the drive is working correctly, completely clean, and free of malware or malicious code that may harm your installation and personal files.
And it's not just a good practice for new drives, but for used hard drives too (especially those previously connected to a different OS), as using the proper formatting, you can avoid issues and compatibility problems.
Basically, when you format a hard drive, you're deleting all the data residing on the storage, and you start clean with a compatible file system (including NTFS, FAT32, or exFAT), which in this case Windows 10 understands to read and write data.
There are many methods available to format a hard drive, but using Disk Management could be considered one of the best options for most users.
In this Windows 10 guide, we'll walk you through the steps to correctly format a traditional hard drive or Solid-State Drive (SSD), whether it already has a partition or it was never initialized.
How to format existing partition using Disk Management
If you have a hard drive already configured with a partition, you can just format the existing partition to erase its content and start fresh with a clean drive.
To format a partition using Disk Management, use these steps:
- Open Start.
- Search for Disk Management and click the top result to open the experience.
- Right-click the new hard drive and select the Format option.
- In the 'Value label' field, type a descriptive name for the drive.
- Use the 'File system' drop-down menu, and select NTFS (recommended for Windows 10).
- Use the 'Allocation unit size' drop-down menu, and select the Default option.
- Check the Perform a quick format option.Quick Tip: While performing a quick format wipes the drive faster, it doesn't check if the drive is damaged. On the other hand, when clearing the option, a full format will be performed, which not only wipes the drive clean, but it'll also check for bad sectors. It's an option that could take several hours, but it's a good practice to make sure the hard drive is in working conditions.
- Unless necessary, clear the Enable file and folder compression option.
- Click the OK button.
- Click the OK button again in the warning message.
Once you've completed the steps, the system will format the selected partition on the drive, and then you can start using it to store files.
How to create and format new partition using Disk Management
If you happen to have a hard drive that was never formatted, you'll need to initialize and create a new partition before you can format it.
Typically, you'll know when a hard drive doesn't have a partition, because it'll not appear in File Explorer, and on Disk Management, it'll appear as unallocated space.
To properly set up a blank hard drive, use these steps:
- Open Start.
- Search for Disk Management and click the top result to open the experience.
- Right-click the hard drive marked as 'Unknown' and 'Not Initialized,' and select Initialize Disk.
- Check the disk to initialize.
- Select the partition style:
- Master Boot Record (MBR) for hard drives smaller than 2TB in size.
- GUID Partition Table (GPT) for hard drives larger than 2TB in size.
- Click the OK button.
- Right-click the Unallocated space, and select the New Simply Value option.
- Click the Next button.
- Under the 'Simple volume size in MB' section, leave the default size if you're planning to use the entire hard drive to store files. Otherwise, specify the amount of space in megabytes that you want to allocate for the partition.
- Click the Next button.
- Use the 'Assign the following drive letter' drop-down menu to select a letter for the new hard drive.
- Click the Next button.
- Use the 'File system' drop-down menu, and select NTFS (recommended for Windows 10).
- Use the 'Allocation unit size' drop-down menu, and select the Default option.
- In the 'Value label' field, type a descriptive name for the drive.
- Check the Perform a quick format option.Quick Tip: If you prefer a full format, clear the quick format option. Just keep in mind that depending on the size of the drive, it can take hours to finish.
- Unless necessary, clear the Enable file and folder compression option.
- Click the Next button.
- Click the Finish button.
After completing the steps, the new hard drive will be initialized, partitioned, and properly formatted.
If you're having trouble using Disk Management to format a hard drive, because of data corruption or other severe issues, you can use the DiskPart command-line tool to fix the problem. Dvd ripper software for el capitan.
While we're focusing this guide on Windows 10, the steps outlined above will also work on Windows 8.1 and Windows 7.
More Windows 10 resources
For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:
Android on DuoFormatting Drive For Mac And Windows
Hands-on with Surface Duo's OS gestures, spanning, app groups, and more
Microsoft's Surface Duo is coming soon, and the company has been working hard on finalizing the version of Android that will be shipping on Surface Duo later this year. Microsoft has released several emulator builds over the last few months, with each one progressing with new changes, bug fixes, and overall polish. Let's go hands-on with the latest build!
PAGE CONTENT:
- Part 1. How to Format SSD in Windows 10/8/7 (3 Ways)
- Part 2. How to Format SSD on a Mac Device
Why Do You Need to Format an SSD
SSD (Solid-State Drive) delivers faster load times for games, applications, and movies. Because of the technology they use, SSDs are lighter and better able to withstand movement and drop page. In addition, SSDs use less energy, allowing computers to run cooler. As a result, most people buy a new SSD to replace the old HDD. Some people also migrate OS to SSD to get better performance. As SSD becomes more and more common, formatting or reformatting becomes important as well.
1.You have bought a new SSD
When you get a new SSD, you need to format it in most cases. The reason for this is that the SSD drive can be used on a variety of platforms. These platforms may employ different file systems (NTFS, HFS+, Ext3, or Ext4). You will need to partition and format the drive so that it can be mounted as a usable storage volume on your system.
2.You want to install Windows 10/8/7 on the SSD
If you want to clean install OS on an SSD, you need to format the SSD. If you want to keep your original OS, programs, and data on your system drive, you can use third-party software to migrate OS to SSD without losing data.
3.You want to sell your SSD
If you want to sell or donate the SSD, you need to erase your personal data. Then, formatting the SSD is a nice choice. Also, you can permanently erase the data on the SSD if you are sure that you don't want to keep the data on the SSD.
What to Do Before You Format an SSD
To format a drive (HDD, HDD, USB flash drive, etc.) means preparing the chosen partition on the drive to be used by an operating system by deleting all of the data and setting up a file system. Before you start formatting an SSD, you should do the following things first:
1.Back up wanted data
Formatting only clears data on the address tables, and data finally disappears once you write new data to the marked space. That is to say, you can recover data with data recovery software if the SSD data is not overwritten. Compared with the recovery method, a regular hard drive backup is easier. Make sure you have backed up wanted files from the drive you are going to format at the very beginning.
2. Enable TRIM to maintain SSD performance
![Formatting drive on mac os for windows installation download Formatting drive on mac os for windows installation download](/uploads/1/2/6/6/126602300/438163499.jpg)
TRIM is an Advanced Technology Attachment command that enables the computer operating system to tell the SSD to erase data blocks when they are no longer in use. If your computer’s operating system offers TRIM support, when enabled, your computer will automatically ensure that data saved to your SSD is managed correctly.
Also read:How to Enable/Disable TRIM on SSD in Windows 10
Part 1. How to Format SSD in Windows 10/8/7 (3 Ways)
It is easy to format an SSD. If your SSD is a new one you need to initialize the SSD and create a new partition on it before you can format it. Here are three effective methods to help you format an SSD.
Method 1. Format SSD in Windows 10/8/7 with EaseUS Partition software (Easiest)
Users have to partition SSD drive in Windows 10 in different situations. And this job can be difficult or easy, depending on whether you have a reliable partition software. So what program you can trust? Here we recommend you EaseUS Partition Master.
The program is a professional disk partition management tool that is designed to format, resize, copy, convert disk partition. It allows you to format SSD into various formats including NTFS quickly and safely. And then you can successfully install Windows 10 on the NTFS formatted SSD drive. You can watch the video to format your SSD easily and quickly.
You can also learn the detailed guide below:
Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose 'Format'.
Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click 'OK'.
Step 3: Then you will see a warning window, click 'OK' in it to continue.
Step 4: Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting the partition on your hard drive.
Method 2. Format SSD with Disk Management
In Windows, formatting a partition is usually done from the Disk Management tool. It can perform some simple disk and partition operations like creating a partition, deleting a partition, formatting, extending or shrinking a partition. You can format SSD with this built-in tool with simple steps:
Step 1. At the start, search for 'Disk Management' and press 'Enter'.
Step 2. Choose the SSD partition you want to format. Right-click it and select 'Format'.
Step 3. Select the file system and set the cluster size. Place a checkmark next to 'Perform a quick format'. Click 'OK' to format the drive.
Formatting an SSD is slightly different from formatting an HDD. SSDs use different technology, so the formatting function is different. That’s why it is important to make sure that Quick Format is checked before formatting an SSD. If unchecked, your computer will carry out a Full Format, which would cause your computer to perform a full read/write cycle, which can shorten the life of an SSD.
Method 3. Format SSD Using CMD in Windows 10
If you would rather use a command line to format the drive, Command Prompt would be the first choice. It is an amazing tool that can manage disks by typing relative command lines. You can solve all kinds of Windows issues through this tool like creating, deleting or formatting a partition. you can Perform CHKDSK to check and repair hard drive issues. And here, you can see how to format SSD using CMD step by step.
Step 1. Type cmd in the search box. Right-click on Command Prompt and choose 'Run as administrator'.
Step 2. On the Command Prompt black window, type diskpart and press 'Enter'. Then, type the following command lines in order. Press 'enter' every time you enter the command:
- X is the partition number of your SSD drive
- Typing assign to assign a drive letter to the newly created partition.
Part 2. How to Format SSD on a Mac Device
What if you are using a Mac and you want to format your SSD? How to make it? It's also a piece of cake to format SSD on Mac. The only difference is the file system. Mac drives usually come formatted in FAT32, which will work on both Macs and PCs. Mac can't write files to volumes with NTFS format. The easiest way is to format the SSD using Mac Disk utility. Before you start formatting the SSD on a Mac device, back up important files. Save any important files on your computer to a USB flash drive or external storage drive. Then, you can read on and format your SSD:
Step 1. Verify the SSD or connect your SSD to the Mac with a USB cable.
Step 2. Open 'Go > Utilities > Applications > Utilities'. Locate and click on your SSD in Disk Utility and then click on 'Erase'. Change the 'Volume Format' drop menu to the 'Mac OS Extended (Journaled)' option.
Step 3. Reset the drive name and click 'Erase', confirm the operation on the next pop-up window.
Wait for the process to complete and then you'll get a compatible file system.
Conclusion
According to the solutions above, you can format your SSD easily. If you are a Windows user, you can directly go to Part 1 to format your SSD with easy steps. If you are a Mac user, you can also format your SSD with detailed steps in Part 2. If you have other problems, you can always ask us for help.